- L3 cache varies with CPU
- Support for Intel® Core™ i7 processors/Intel® Core™ i5 processors/ Intel® Core™ i3 processors/Intel® Pentium® processors/Intel® Celeron® processors in the LGA1155 package
- (Some Intel® Core™ processors require a graphic card, please refer "CPU support List" for more information.)
|
- Intel® Z68 Express Chipset
|
- 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
- Dual channel memory architecture
- Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
- Support for non-ECC memory modules
- Support for Extreme Memory Profile (XMP) memory modules
- * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
- (Please refer "Memory Support List" for more information.)
|
Integrated Graphics Processor:
- 1 x HDMI port, supporting a maximum resolution of 1920x1200
|
- Support for Dolby® Digital Live and DTS™ Connect
- Support for X-Fi Xtreme Fidelity® and EAX® Advanced HD™ 5.0 technologies
- Support for S/PDIF Out
- 1 x Creative CA20K2 chip
- 2/4/5.1/7.1-channel
- High Definition Audio
|
- 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit)
|
- 1 x PCI Express x16 slot, running at x8 (PCIEX8)
* The PCIEX8 slot shares bandwidth with the PCIEX16 slot. When the PCIEX8 slot is populated, the PCIEX16 slot will operate at up to x8 mode. - 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. - (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
* To support PCI Express 3.0, you must install an Intel 22nm CPU. - 2 x PCI Express x1 slots
(All PCI Express slots conform to PCI Express 2.0 Standard.) - 2 x PCI
|
- Support for AMD CrossFireX™ / NVIDIA SLI technology
*The PCIEX16 slot operates at up to x8 mode when AMD CrossFireX™/NVIDIA SLI is enabled.
|
Chipset:
- Support for RAID 0, RAID 1, RAID 5, and RAID 10
* When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected. - 1 x eSATA 3Gb/s connector (eSATA/USB Combo connector) on the back panel supporting up to 1 SATA 3Gb/s device
- 3 x SATA 3Gb/s connectors (SATA2_2~SATA2_4) supporting up to 3 SATA 3Gb/s devices
- 2 x SATA 6Gb/s connectors (SATA3_0, SATA3_1) supporting up to 2 SATA 6Gb/s devices
1 x Marvell 88SE9172 chip:
- 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
- Support for RAID 0 and RAID 1
|
Chipset:
- Up to 14 USB 2.0/1.1 ports (8 on the back panel, including 1 eSATA/USB Combo, 6 via the USB brackets connected to the internal USB headers)
2 x Etron EJ168 chips:
- Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)
|
- 1 x CPU overclocking button header
- 4 x system fan headers
- 1 x serial port header
- 1 x heatsink LED power connector
- 1 x USB 3.0/2.0 header
- 4 x SATA 6Gb/s connectors
- 1 x front panel audio header
- 1 x 24-pin ATX main power connector
- 1 x front panel header
- 1 x CPU fan header
- 1 x clearing CMOS jumper
- 3 x USB 2.0/1.1
- 3 x SATA 3Gb/s
- 1 x 8-pin ATX 12V power connector
- 1 x Trusted Platform Module (TPM) header
TPM function is optional due to different regional policy - 1 x SPDIF out
|
- 1 x RJ-45 port
- 7 x USB 2.0/1.1 ports
- 1 x CPU overclocking button
- 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)
- 1 x PS/2 keyboard/mouse port
- 2 x USB 3.0/2.0
- 1 x eSATA/USB Combo connector
- 1 x HDMI port
- 1 x SPDIF out (optical)
|
- iTE IT8728
|
- CPU/System fan fail warning
- CPU/System fan speed detection
- CPU/System fan speed control
*Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. - CPU overheating warning
- System voltage detection
- CPU/System temperature detection
|
- 2 x 32 Mbit flash
- Use of licensed AWARD BIOS
- PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
- Supports DualBIOS™
|
- Supports @BIOS™
- Support for EasyTune
* Available functions in EasyTune may differ by motherboard model. - Support for Cloud OC
- Support for Q-Flash
- Support for ON/OFF Charge
- eXtreme Hard Drive
- Auto Green
- Support for Smart 6™
- Support for Dynamic Energy Saver™ 2
- Support for Q-Share
- Xpress™ BIOS Rescue
- Xpress™ Recovery 2
- Xpress™ Install
- Download Center
- Support for 3TB+ Unlock
- Support for TouchBIOS
|
- Norton Internet Security (OEM version)
- Intel® Smart Response Technology
- LucidLogix Virtu
*Make sure the monitor cable has been connected to the integrated graphics port on the back panel.
|
- Support for Microsoft® Windows 7/Vista/XP
|
- E-ATX Form Factor; 30.5cm x 26.4cm
|
- Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.
- Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
|
* Advertised performance is based on maximum theoretical interface values from respective Chipset vendors or organization who defined the interface specification. Actual performance may vary by system configuration.
* All trademarks and logos are the properties of their respective holders.
* Due to standard PC architecture, a certain amount of memory is reserved for system usage and therefore the actual memory size is less than the stated amount.